SERVICES & INFORMATION
STANDARDS AND STANDARDISATION
Opening Hours
Monday: 08:30 a.m. – 14:30 p.m.
Tuesday: 08:30 a.m. – 14:30 p.m.
Wednesday: 08:30 a.m. – 15:00 p.m.
Thursday: 08:30 a.m. – 14:30 p.m.
Friday: 08:30 a.m. – 14:30 p.m.
| No. | Standard Ref. | Title In Greek | Title In English | C/V | Scope | Language | Price € without VAT | |
|---|---|---|---|---|---|---|---|---|
| 1 | CYS 0:Μέρος 1:1979 | Πρότυπος διαδικασία δια τον καταρτισμόν προτύπων Μέρος 1: Εισαγωγή εις την τυποποίηση | A standard for standards Part 1: Introduction to standardization | V | This part of CYS 0 describes the general aims and principles of standardization, the various types of Cyprus standards and the range of requirements they cover. It also outlines CYS policy in relation to technological development and alignment with inter | EN | 40 | |
| 2 | CYS 0:Μέρος 2:1979 | Πρότυπος διαδικασία δια τον καταρτισμόν Προτύπων Μέρος 2: Σχεδιασμός κυπριακών προτύπων | A standard to Standards Part 2: Drafting of Cyprus standards | V | This part of CYS 0 deals with the detailed drafting of Cyprus Standards specifications, methods of test, glossaries, codes of practice, frafts for development and published documents. Reference is also made to some of the Legal aspects affecitng the statu | EN | 43 | |
| 3 | CYS 0: Μέρος 3:1979 | Πρότυπος διαδικασία δια τον καταρτισμό Προτύπων Μέρος 3: Επιτροπαί, οργάνωσης και τρόπος εργασίας | A standard for Standards Part 3: CYS committee organization and procedures | V | This part of 0 describes the present committee structure of CYS and the relevant procedures, including those for the appointment of committee chairmae and members, the preparation and approval of standards and the amendment, revision and withdrawal of Cyp | EN | 49 | |
| 4 | CYS 0: Μέρος 4:1979 | Πρότυπο διαδικασία δια τον καταρτισμόν Προτύπων Μέρος 4: Οδηγός δια την έκδοσιν κυπριακών προτύπων | A standard for Standards Part 4: Guide to CYS editorial practice | V | This part of CYS 0 specifies requirements for the general presentation and arrangement of the content of a Cyprus Standard, and for the preparation of manuscripts. It also defines details of style and typography | EN | 66 | |
| 5 | CYS 13:1987 Τροποποίηση αρ.16/2002 | Τεχνολογία σκυροδέματος | Concrete technology | V | Tο πρότυπο αυτό, αναφέρεται στα οικοδομικά στοιχεία και κατασκευές, η μελέτη και εκτέλεση των οποίων γίνεται σύμφωνα με τους οικοδομικούς κανονισμούς. Ιδιαίτερα, ασχολείται με τα κριτήρια που επηρεάζουν την εκλογή των βασικών υλικών και τον υπολογισμό μει | GR | 74 | |
| 6 | CYS 92:1989 | Προδιαγραφή για φρέσκο γάλα | Specification for fresh milk | C | Το πρότυπο αυτό αναφέρεται αποκλειστικά στο φρέσκο αγελαδινό γάλα. Περιγράφει τη βασική του σύσταση, τα ποιοτικά χαρακτηριστικά, μεθόδους δειγματοληψίας και εξετάσεων. | GR | 26 | |
| 7 | CYS 94-1:1985 | Προδιαγραφή για φρέσκο χαλλούμι | Specification for fresh halloumi | C | Το πρότυπο προδιαγράφει το φρέσκο χαλλούμι. Τhis standard prescribes the product known as fresh halloumi, its requirements and the methods of test. (YΠΑΡΧΕΙ ΚΑΙ ΣΤΗΝ ΕΛΛΗΝΙΚΗ ΓΛΩΣΣΑ ΜΕ ΤΗΝ ΙΔΙΑ ΤΙΜΗ) | EN | 26 | |
| 8 | CYS 94:Μέρος 2:1985 | Προδιαγραφή για χαλλούμι (ώριμο) | Specification for halloumi | C | Το πρότυπο προδιαγράφει το χαλλούμι | GR | 26 | |
| 9 | CYS 98:part 1:1999 | Θερμομονώσεις και ορθολογική μελέτη και χρήση ενέργειας στις κατοικίες – Μέρος 1: Απαιτήσεις θερμομόνωση | Thermal insulation | C | Επιπρόσθετα και ανεξάρτητα από την ορολογία, συμβολισμούς και μονάδες μέτρησης που αναφέρονται στο CYS210 χρησιμοποιούνται και οι ακόλουθοι ορισμοί: κατοικία, θερμομόνωση στις κατοικίες, σχετική υγρασία του αέρα, σημείο δρόσου, ύδωρ συμπυκνώσεως κα. | GR | 48 | |
| 10 | CYS 111:1990 | Προδιαγραφή για έτοιμο σκυρόδεμα | Specification for ready-mixed concrete | C | αυτό το πρότυπο καθορίζει την προδιαγραφή για έτοιμο σκυρόδεμα και ισχύει από την έναρξη της παραγωγής του έτοιμου σκυροδέματος μέχρι την παράδοση του στο εργοτάξιο | GR | 54 | |
| 11 | CYS 150:1986 | Προδιαγραφή για χαλυβδοσωλήνες με σπείρωμα, χωρίς σπείρωμα ή με συνδέσμους | Specification for screwed and socketed steel tubes and tubulars and plain end steel tubes | V | This standard specifies requirements for screwed and socketed steel tubes and tubular and for plain end steel tubes suitable for welding or for screwing to BS21 pipe threads. | EN | 74 | |
| 12 | CYS 210:1991 | Θερμομονώσεις – Φυσικά μεγέθη και ορισμοί | Thermal insulation – Physical quantities and definitions | V | this standard defines physical quantities used in the field of thermal insulation, and gives the corresponding symbols and units | EN | 37 | |
| 13 | CYS 227:1991 | Προδιαγραφή για επεξεργασία πληροφοριών – Διάταξη ελληνολατινικών πληκτρολογίων | Specification for information processing – Layout of Greek- Latin keyboards | V | Αυτό το κυπριακό πρότυπο καθορίζει το ελάχιστο σύνολο των γραφικών χαρακτήρων που πρέπει ένα ελληνολατινικό πληκτρολόγιο να διαθέτει, το οποίο ονομάζεται πλήρες σύνολο χαρατήρων. Καθορίζει επίσης την πλήρη διάταξη αυτών των γραφικών χαρακτήρων στο πληκτρο | GR | 43 | |
| 14 | CYS 228:1991 | Προδιαγραφή για επεξεργασία πληροφοριών – Σύνολο γραφικών χαρακτήρων – 8 ψηφία παράσταση ελληνικού και λατινικού αλφαβήτου | Specification for information processing – 8 bit single-byte coted graphic character sets – Latin-Greek alphabet | V | This standard defines a set of 185 graphic characters indentified as the latin/greek aplhabet, and specifies the coded representatino of each these characters by means of a singe 8-bit byte. None of these characters are non-spacing. | GR | 37 | |
| 15 | CYS 300:2019 | Συμπληρωματικό Κυπριακό Πρότυπο στο CYS EN 206-1 | Supplementary Cyprus National Standard to CYS EN 206-1 | V | Το παρόν πρότυπο εφαρµόζεται για οπλισµένο και άοπλο σκυρόδεµα το οποίο προορίζεται για οικοδοµικά και τεχνικά έργα. Χρησιµοποιείται σε συνδυασµό µε το Πρότυπο CYS EN 206-1:2000 Σκυρόδεµα – Μέρος 1: Προδιαγραφή, επιτελεστικότητα, παραγωγή και συµµόρφωση, | GR | 58 | |
| 16 | CYS ΕΛΟΤ ΠΡΔ 1417:2003 | Αγροτουρισμός - Ορολογία και γενικές απαιτήσεις για τους παροχείς υπηρεσιών αγροτουρισμού | Rular tourism - Terminology and general requirements for rural tourism service providers | V | Η παρούσα Ελληνική Προδιαγραφή καθορίζει γενικές απαιτήσεις για την ποιότητα του συστήµατος διαχείρισης των παρεχοµένων υπηρεσιών αγροτουρισµού από τις αγροτουριστικές επιχειρήσεις. Η παρούσα προδιαγραφή µπορεί να χρησιµοποιηθεί από τους παροχείς υπηρεσιώ | GR | 37 | |
| 17 | CYS 302:2010 | Χάλυβες οπλισμού σκυροδέματος – Συγκολλήσιμοι χάλυβες: Τεχνικές κατηγορίες B500A και Β500C (ΥΠΑΡΧΕΙ ΚΑΙ ΣΤΗΝ ΕΛΛΗΝΙΚΗ ΓΛΩΣΣΑ - Η ΤΙΜΗ ΕΙΝΑΙ Η ΙΔΙΑ) | Steel for the reinforcement of concrete – Weldable reinforcing steel: Technical classes B500A and Β500C | V | Αυτό το Κυπριακό Πρότυπο καθορίζει τους τεχνικούς όρους παράδοσης – τις μηχανικές, χημικές και γεωμετρικές ιδιότητες και την αξιολόγηση της συμμόρφωσης – για συγκολλήσιμους χάλυβες οπλισμού σκυροδέματος με νευρώσεις, τεχνικών κατηγοριών Β500Α και B500C, π | EN | 37 | |
| 18 | CYS 106:2010 | Specification for Low density polyethylene (LDPE) pipes for agricultural applications | V | This standard specifies the characteristics of preferable black LDPE pipes intended to be used for the conveyance of water for agricultural applications. This standard covers pipes with nominal outside diameters from 16 mm to 40 mm and nominal pressures o | EN | 40 | ||
| 19 | CYS BS 6920-1:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification | V | This part of BS 6920 specifies requirements for the suitability of non-metallic products, including water fittings and components, pipes and materials used in coating, protection, lining, jointing, sealing and lubrication, for use in contact with either h | EN | 43 | ||
| 20 | CYS BS 6920-2.1:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing | V | This section of BS 6920 describes the preparation of samples of all types of non-metallic products for testing their suitability for use in contact with water intended for human consumption | EN | 66 | ||
| 21 | CYS BS 6920- 2.2.1:2000 +A3:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Odour and flavour of water. General method of test | V | This subsection of BS 6920 describes a method designed to assess the ability of a product to impart a discernible odour and/or flavour to water intended for human consumption. The method is applicable for most types of non-metallic products used in contac | EN | 49 | ||
| 22 | CYS BS 6920- 2.2.2:2000+A1:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Odour and flavour of water. Method of testing odours and flavours imparted to water by hoses and com | V | This subsection of BS 6920 describes a method designed to assess the ability of flexible hoses (including reinforcements) and composite pipes/tubes to impart a discernible odour or flavour to water intended for human consumption | EN | 30 | ||
| 23 | CYS BS 6920- 2.2.3:2000+A2:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. Method of testing tastes imparted to water by hoses for con | V | Τhis standard describes a method designed to assess the ability of flexible hoses (including reinforcements) to impart a discernible odour or flavour to water intended for use in the preparation of food and drinks. It is applicable only to the testing of | EN | 30 | ||
| 24 | CYS BS 6920- 2.3:2000+A1:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Appearance of water | V | This section of BS 6920 describes a method designed to assess the ability of a product to impart any noticeable colour or turbidity to water intended for human consumption. The method is applicable to all types of non-metallic product used in contact with | EN | 30 | ||
| 25 | CYS BS 6920- 2.4:2000+A1:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Growth of aquatic micro-organisms test | V | This section of BS 6920 specifies a method for assessing the ability of a product to promote the multiplication of aerobic aquatic microorganisms in water intended for human consumption. The method is applicable to all types of non-metallic product used i | EN | 37 | ||
| 26 | CYS BS 6920- 2.5:2000+A2:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of substances that may be of concern to public health | V | This section of BS 6920 specifies a screening procedure (simple cytotoxicity test) using a mammalian cell line and a leachate from a product. The results of this procedure will assist in the toxicological assessment of the product for use in contact with | EN | 40 | ||
| 27 | CYS BS 6920- 2.6:2000+A2:2014 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of metals | V | This section of BS 6920 specifies the test procedure for assessing the leachability of metals from non-metallic products when used in contact with water intended for human consumption | EN | 37 | ||
| 28 | CYS BS 6920-3:2000 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature tests | V | This part of BS6920 describes methods designed to assess the ability of a non-metallic product to affect hot and boiling water intended for human consumption by imparting a discernible odouror flavour,or any notice able colour or turbidity. | EN | 23 | ||
| 29 | CYS ISO IWA 31:2020 | Risk Management - Guidelines on using ISO 31000 in management systems (IWA 31:2020 IDT) | V | EN | 49 | |||
| 30 | CYS 400:2015 | Λευκαρίτικο Κέντημα – Χαρακτηριστικά, Τεχνική, Υλικά και Μέσα | - | V | Σκοπός του παρόντος εθνικού κυπριακού προτύπου είναι ο ορισμός του κυπριακού Λευκαρίτικου Κεντήματος ή Λευκαρίτικου, με στόχο τη διατήρηση της παράδοσης και τη διάκριση του αυθεντικού χειροποίητου κεντήματος από άλλα είδη κεντημάτων. | GR | 74 | |
| 31 | CYS ISO 37001:2018 | Συστήματα διαχείρισης για την καταπολέμηση της δωροδοκίας - Απαιτήσεις και οδηγίες χρήσης (ISO 37001:2016 IDT) | Anti-bribery management systems -- Requirements with guidance for use | V | CYS ISO 37001:2018 specifies requirements and provides guidance for establishing, implementing, maintaining, reviewing and improving an anti-bribery management system. | EN | 97 | |
| 32 | CYS ISO TR 31004:2020 | Risk Management - Guidelines for the implementation of ISO 31000 (ISO /TR 31004:2013 IDT) | EN | 74 | ||||
| 33 | CYS ISO 31022:2020 | Risk Management - Guidelines for the Management of legal risk (ISO 31022:2020 IDT) | EN | 78 | ||||
| 34 | CYS ISO 31000:2020 | Διαχείριση της διακινδύνευσης - Κατευθυντήριες οδηγίες | Risk Management - Guidelines (ISO 31000:2018 IDT) | EN | 54 | |||
| 35 | CYS ISO 11121:2019 | Υπηρεσίες καταδύσεων αναψυχής - Απαιτήσεις για εισαγωγικά προγράμματα κατάρτισης αυτοδυτών | Recreational diving services - Requirements for introductory programmes to scuba diving | EN | 37 | |||
| 36 | CYS ISO 13289:2019 | Recreational diving services - Requirements for the conduct of snorkelling excursions | EN | 33 | ||||
| 37 | CYS NA to CYS EN 13108-1:2016 | Εθνικό προσάρτημα στο CYS EN 13108-1:2016 Aσφαλτομίγματα - Προδιαγραφές υλικών - Μέρος 1 : Ασφαλτικό σκυρόδεμα | Εθνικό προσάρτημα στο CYS EN 13108-1:2016 Aσφαλτομίγματα - Προδιαγραφές υλικών - Μέρος 1 : Ασφαλτικό σκυρόδεμα | Τα μίγματα για Ασφαλτικό Σκυρόδεμα πρέπει να συνάδουν με το πρότυπο CYS EN 13108:2016 Η συμμόρφωση πρέπει να εξασφαλίζεται σύμφωνα με τις πρόνοιες των προτύπων CYS EN 13108-20:2013 και CYS EN 13108-21:2013. | GR | 58 | ||
| 38 | CYS 401:2022 | Φυθκιώτικα – Υφαντά κεντήματα Φύτης στον αργαλειό | Fythkiotika - Fyti embroideries on a weaving loom | Σκοπός του παρόντος εθνικού κυπριακού προτύπου είναι ο ορισμός του κυπριακού Φυθκιώτικου (κεντήματος του αργαλειού), με στόχο τη διατήρηση της παράδοσης και τη διάκριση του αυθεντικού χειροποίητου κεντήματος του αργαλειού από άλλα είδη κεντημάτων, είτε χειροποίητων είτε κατασκευασμένων στη μηχανή. Στόχος είναι να διατηρηθεί ζωντανή η παράδοση, χωρίς να εμποδίζεται η δημιουργικότητα. Ο ορισμός του Φυθκιώτικου γίνεται με την ταυτοποίηση και τον καθορισμό των ελαχίστων ιδιαιτέρων χαρακτηριστικών, τα οποία είναι αναγκαία για την διάκρισή του από άλλα είδη κεντήματος. Τα χαρακτηριστικά περιλαμβάνουν σχέδια, υλικά και στοιχεία τεχνικής και παράδοσης. Το πρότυπο αυτό μπορεί να αποτελέσει οδηγό για τους εμπλεκόμενους κοινωνικούς εταίρους, ώστε να διασφαλιστεί η γνησιότητα και μοναδικότητα του Φυθκιώτικου. | GR | 128 | ||
| 39 | CYS ISO 7101:2023 | Healthcare organization management - Management systems for quality in healthcare organizations - Requirements | ISO 7101 is the first international consensus standard for healthcare quality management. It prescribes requirements for a systematic approach to sustainable, high quality health systems, enabling organizations of any scale, structure, or region to: create a culture of quality starting with strong top management; embrace a healthcare system based on people-centred care, respect, compassion, co-production, equity and dignity; identify and address risks; ensure patient and workforce safety and wellbeing; control service delivery through documented processes and documented information; monitor and evaluate clinical and non-clinical performance; continually improve its processes and results. | EN | 84 | |||
| 40 | CYS ISO 37001:2025 | ISO 37001:2025 Anti-bribery management systems — Requirements with guidance for use (ISO 37001:2025, IDT) | Anti-bribery management systems — Requirements with guidance for use (ISO 37001:2025, IDT) | EN | 97 | |||
| 41 | CYS TS 600:2024 | Circular plastic products – Recycled content traceability and conformity assessment of recyclates and final products – Basic elements of a certification scheme | This document specifies the basic elements of a certification scheme for both plastic recyclates and plastic end-products in order to verify conformity with requirements specified in this document, in regards to their origin and recycled content, as well as conformity with standards related to plastic waste recyclates and environmental claims. It includes requirements regarding the production process and management system. A product certification scheme for continuous production consists of the following stages: • initial evaluation • review of evidence of conformity • certification decision and attestation • surveillance activities. It is intended to be used by certification bodies seeking to create and maintain certification schemes for plastic products covering one or more aspects of circular economy. This document is applicable for all recyclable plastic materials (based on the current state of the art). The document also applies to all plastic products which can incorporate recyclate content. NOTE 1: Plastic products must comply, when existing, with applicable legislation and/or other related requirements that ensure fitness for purpose, e.g. use of recycled content, performance product standards etc. | EN | 72 | |||
| 42 | CYS TS 500:2025 | Specification for the identification of plastic pipelines used by utility services in public below ground installations | This document specifies the colours for the identification of pipes used by utility services in public below ground installations. The services covered by this specification include the following: • drinking water • reclaimed water • raw water • rainwater • sewerage/ wastewater • electrical applications • electronic communications (telecommunications) • information & communication technology (ICT) services The document also covers the cases where the below ground pipes extend above ground to be connected to above ground networks. This document applies to PVC-U and PE pipes and the method used is the identification through basic colour assignment. | EN | 40 | |||
| 43 | CYS 550:2025 | Σχεδιασμός - Κατασκευή - Σήμανση και Διαχείριση Πεζοπορικών Mονοπατιών: Απαιτήσεις και Συστάσεις | Το παρόν πρότυπο καθορίζει τις απαιτήσεις και θέτει κριτήρια σχετικά με τα γενικά χαρακτηριστικά και τον βαθμό δυσκολίας των πεζοπορικών μονοπατιών. Επιπρόσθετα, το πρότυπο καθορίζει ελάχιστες απαιτήσεις και συστάσεις σχετικά με τον σχεδιασμό, την κατασκευή, τη σήμανση και τη διαχείριση των πεζοπορικών μονοπατιών. Μέσω της συντήρησης και σχετικών άλλων ενεργειών διασφαλίζεται η συνεχής συμμόρφωση των μονοπατιών, ως προς τις πρόνοιες του προτύπου, με στόχο την αισθητική απόλαυση του φυσικού περιβάλλοντος και τη διασφάλιση κατάλληλου επιπέδου ασφάλειας και πρόσβασης κατά τη χρήση των πεζοπορικών μονοπατιών. | GR | 84 | |||
| 44 | CYS ISO 21001:2025 | Educational organizations — Management systems for educational organizations — Requirements with guidance for use (ISO 21001:2025, IDT) | This document specifies requirements and provides guidance for a management system for educational organizations (EOMS) when such an organization: a) needs to demonstrate its ability to support the acquisition and development of competence through teaching, learning or research; b) aims to enhance satisfaction of learners, other beneficiaries and staff through the effective application of its EOMS, including processes for improvement of the system and assurance of conformity to the requirements of learners and other beneficiaries. All requirements of this document are generic and intended to be applicable to any educational organization that uses a curriculum to support the development of competence through teaching, learning, training or research, regardless of the type, size or method of delivery. This document can be applied to educational organizations within larger organizations whose core business is not education, such as professional training departments. This document also provides guidance for the use of a EOMS. This document does not apply to organizations that only produce or manufacture educational products. | EN | 109 | |||
| 45 | CYS ISO 21500:2021 | Project, programme and portfolio management — Context and concepts | This document specifies the organizational context and underlying concepts for undertaking project, programme and portfolio management. It also provides guidance for organizations to adopt or improve project, programme and portfolio management using the standards prepared by ISO/TC 258. This document is applicable to most organizations, including public and private organizations and it is not dependent on the size and type of the organization. It is also applicable to any project, programme and portfolio, regardless of complexity, size or duration. Further guidance on project, programme and portfolio management, and the governance thereof, is given in ISO 21502, ISO 21503, ISO 21504 and ISO 21505. | EN | 43 | |||
| 46 | CYS ISO 21502:2020 | Project, programme and portfolio management — Guidance on project management | This document gives guidelines for project management. It is applicable to any organization, including public, private and charitable, as well as to any type of project, regardless of purpose, delivery approaches, life cycle model used, complexity, size, cost or duration. NOTE Delivery approach can be any method or process suited to the type of outputs, such as predictive, incremental, iterative, adaptive or hybrid, including agile approaches. This document provides high-level descriptions of practices that are considered to work well and produce good results within the context of project management. This document does not provide guidance on the management of programmes or portfolios. Topics relating to general management are addressed only within the context of project management. | EN | 104 | |||
| 47 | CYS ISO 21503:2020 | Project, programme and portfolio management — Guidance on programme management | This document gives guidance on programme management. It is applicable to any type of organization including public or private and any size or sector, as well as any type of programme in terms of complexity. This document provides high-level descriptions of relevant terms, definitions, concepts, prerequisites and practices, including roles and responsibilities that form good practice in programme management. It does not provide guidance on processes, methods and tools. | EN | 58 | |||
| 48 | CYS ISO 21504:2022 | Project, programme and portfolio management — Guidance on portfolio management | This document gives guidance on the principles of project and programme portfolio management. This document is relevant to any type of organization including public or private and any size organization or sector. The guidance presented in this document is intended to be adapted to suit the specific environment of each project and programme portfolio. This document does not provide guidance on project management, programme management, or other specific types of portfolio management (such as financial portfolio management). | EN | 54 | |||
| 49 | CYS ISO 21505:2017 | Project, programme and portfolio management — Guidance on governance | ISO 21505:2017 describes the context in which the governance of projects, programmes and portfolios is conducted and provides guidance for the governance of projects, programmes and portfolios. ISO 21505:2017 can also be used for assessment, assurance or verification of the governance function for projects, programmes or portfolios. ISO 21505:2017 is intended for governing bodies and executive and senior management who influence, impact or make decisions regarding the governance of projects, programmes and portfolios. It is also intended to provide guidance to those who direct projects, programmes and portfolios, such as sponsors, steering committees, portfolio owners and the project management office. It also can be used by project, programme and portfolio managers, as well as stakeholders involved in the development and implementation of projects, programmes and portfolios. Other audiences who can have an interest in this topic include those advising, informing, assisting or working within projects, programmes and portfolios. | EN | 61 | |||
| 50 | CYS ISO 21506:2024 | Project, programme and portfolio management — Vocabulary | This document defines terms used in the field of project, programme and portfolio management. This document is applicable to any type of organization, including public or private, and any size or sector, as well as any type of project, programme or portfolio in terms of complexity, size or duration. | EN | 43 | |||
| 51 | CYS ISO 37000:2021 | Governance of organizations – Guidance (ISO 37000:2021, IDT) | This document gives guidance on the governance of organizations. It provides principles and key aspects of practices to guide governing bodies and governing groups on how to meet their responsibilities so that the organizations they govern can fulfil their purpose. It is also intended for stakeholders involved in, or impacted by, the organization and its governance. It is applicable to all organizations regardless of type, size, location, structure or purpose. | EN | 89 | |||
| 52 | CYS ISO 37000:2021 | Whistleblowing management systems — Guidelines (ISO 37002:2021, IDT) | This document gives guidelines for establishing, implementing and maintaining an effective whistleblowing management system based on the principles of trust, impartiality and protection in the following four steps: a) receiving reports of wrongdoing; b) assessing reports of wrongdoing; c) addressing reports of wrongdoing; d) concluding whistleblowing cases. The guidelines of this document are generic and intended to be applicable to all organizations, regardless of type, size, nature of activity, and whether in the public, private or not-for profit sectors. The extent of application of these guidelines depends on the factors specified in 4.1, 4.2 and 4.3. The whistleblowing management system can be stand-alone or can be used as part of an overall management system. | EN | 84 | |||
| 53 | CYS ISO 37003:2025 | Fraud control management systems — Guidance for organizations managing the risk of fraud (ISO 37003:2025, IDT) | What is ISO 37003? ISO 37003 provides guidance for organisations to develop, implement and maintain a fraud control management system (FCMS). It addresses the full lifecycle of fraud risk — from prevention and detection to response and continual improvement. The guidance applies to all types of organisations, across public, private and not-for-profit sectors, and supports leaders in managing both internal and external fraud risks. Why is ISO 37003 important? Fraud remains one of the most damaging and pervasive threats to organisations worldwide. Its impact extends far beyond financial losses — it can erode trust, damage reputations and create legal and emotional fallout. ISO 37003 helps organisations navigate this risk by offering a structured and proactive approach to fraud management. It promotes clear processes for identifying and assessing fraud risks, implementing controls, detecting suspicious activity and responding effectively to incidents. While it cannot guarantee that fraud will never occur, it significantly strengthens an organisation's resilience and preparedness in the face of growing complexity and digital threats. Benefits Reduced exposure to financial and reputational damage from fraud Strengthened internal controls and fraud detection capability Increased stakeholder confidence through structured governance Better response and recovery from fraud incidents Ongoing improvement of fraud prevention measures | EN | 92 | |||
| 54 | CYS ISO 37004:2023 | Governance of organizations — Governance maturity model — Guidance (ISO 37004:2023, IDT) | This document gives guidance on evaluating the establishment of governance conditions and on the application of governance principles with consideration for the ISO 37000 key aspects of practice. It sets out the concept of governance maturity and its measurement and provides a governance maturity measurement framework, associated governance maturity scale and a governance maturity model. This document is applicable to all types and sizes of organizations no matter their location | EN | 66 | |||
| 55 | CYS ISO 37005:2024 | Governance of organizations — Developing indicators for effective governance (ISO 37005:2024, IDT) | This document provides guidance to governing bodies on how to approach the development and use of indicators in their governing activities. This document is primarily written for use by governing bodies, it is also written to be of relevance to a range of other stakeholders inside and outside of the organization to help them improve the quality of the information on which they assess and make decisions regarding the organization’s governance. It is applicable to all organizations regardless of type, size, location, structure or purpose. This document does not cover indicators of effective governance. | EN | 58 | |||
| 56 | CYS ISO/TS 37008:2023 | Internal investigations of organizations — Guidance (ISO/TS 37008:2023, IDT) | This document gives guidance on internal investigations within organizations, including: — the principles; — support for investigations; — establishment of the policy, procedures, processes and standards for carrying out and reporting on an investigation; — the reporting of investigation results; — the application of remedial measures. This document is applicable to all organizations regardless of type, size, location, structure or purpose. NOTE See Annex A for guidance on the use of this document. | EN | 84 | |||
| 57 | CYS ISO 37009:2025 | Conflict of interest in organizations — Guidance (ISO 37009:2025, IDT) | This document provides guidance to organizations on how to identify, assess, resolve and monitor conflict of interest based on the principles of trust, integrity, transparency and accountability. The guidance in this document is generic and intended to be applicable to all organizations, regardless of type, size and nature of activity and whether in the public, private or not-for-profit sectors. It distinguishes between actual, apparent and potential conflict of interest. | EN | 61 | |||
| 58 | CYS ISO 37301:2021 (+A1:2024) | Compliance management systems — Requirements with guidance for use (ISO 37301:2021+ A1:2024, IDT) | What is ISO 37301? ISO 37301 is an international standard for compliance management systems (CMS). It provides guidelines for establishing, developing, implementing, evaluating, maintaining, and improving an effective and responsive compliance management system within organizations. Why is ISO 37301 important? ISO 37301 is crucial for organizations looking to ensure adherence to laws, regulations, and ethical standards within their operational context. It helps in mitigating risks, fostering a culture of integrity, and enhancing organizational governance and reputation. Benefits of ISO 37301 Promotes ethical business practices and reduces the risk of non-compliance Enhances trust among stakeholders Improves management processes and operational efficiency Supports corporate governance and responsibility | EN | 89 | |||
| 59 | CYS ISO 37302:2025 | Compliance management systems — Guidance for the evaluation of effectiveness (ISO 37302:2025, IDT) | What is ISO 37302? ISO 37302 provides a framework for evaluating the effectiveness of a compliance management system (CMS). It includes principles, indicators, and guidance to help organizations monitor, measure, and review how well their CMS is working. The standard is designed to support continual improvement and reinforce compliance across all areas of operation. Why is ISO 37302 important? A strong compliance management system helps organizations meet legal and regulatory obligations, uphold ethical standards, and build trust with stakeholders. ISO 37302 offers a structured approach to evaluate how well a CMS is functioning, identify areas for improvement, and ensure compliance becomes part of the organization's culture. Benefits Helps organizations measure the effectiveness of their compliance management system Supports continual improvement and accountability Promotes integration of compliance into the organization's culture and daily operations Aligns with ISO 37301 and supports consistent global practices Builds trust with regulators, stakeholders and the public | EN | 92 | |||
| 60 | CYS ISO 37303:2025 | Compliance management systems — Guidance for competence management (ISO 37303:2025, IDT) | What is ISO 37303? ISO 37303 provides guidance on how to determine and develop the necessary competencies to support an effective compliance management system. It helps organizations build and maintain a workforce with the right knowledge, skills, and experience to meet compliance obligations and foster a strong compliance culture. Why is ISO 37303 important? Competence is essential to a functioning and reliable compliance management system. ISO 37303 supports organizations in identifying the right competencies across internal roles and third parties, ensuring that compliance isn’t just about rules—but about people who understand, implement and sustain them effectively. Benefits Aligns staff competencies with compliance goals Supports a strong compliance culture across the organization Enhances the effectiveness and reliability of the compliance management system Can be integrated with ISO 37301 and other management systems Improves performance, accountability and training outcomes | EN | 61 |